ACTIVE BASSREFLEX SUBWOOFER
FLYABLE via M10 or DRK1/DRK2+LP4
900W RMS DIGIPRO® G3 AMPLIFIER
134 dB MAX SPL
USABLE BANDWIDTH [- 6 dB]: 40 Hz to cut frequency
LF: 1 x 15”, 4” v.c. - NEODYMIUM
WEIGHT: 32.8Kg (72.3 lbs)
EXTENDING THE FLYABLE CONCEPT
VIO S115 is a self-powered, flyable, single 15" subwoofer, with a standard frontal bass reflex acoustic configuration. It is definitely inspired by dBTechnologies popular VIO S118R subwoofer, with the advantages of being flyable.
A compact VIO sub, just perfect as a complement for all VIO X full range series. The system is loaded with a 15" neodymium woofer, driven by a 900 W RMS Digipro G3 amp, which allows for complete networkability with all other speakers in VIO family.
The cabinet is provided with M10 flying points and M20 pole mounts on both top and side of the box, so the sub allows for horizontal or vertical use, when flown or ground stacked. Two different flybars and sub brackets open for tons of possible configurations with VIO X206 boxes when in line array mode, a single flybar allowing for a simple set up, and a double flybar, which allows to fly multiple sub arrays and top arrays together, and many more configurations that will suit any installation requirements.
Technical Data
Speaker Type
Active Bassreflex Subwoofer
Acoustical data
Frequency Response [- 6 dB]
40 Hz - (user frequency LPF)
Frequency Response [- 10 dB]
36 Hz - (user frequency LPF)
Max SPL
134 dB
LF
1x 15"
Voice Coil LF
4"
Directivity
Omnidirectional
Amplifier
Amp Technology
Digipro® G3
Amp Class
Class D
RMS Power
900 W
Peak Power
1800 W
Cooling
Convection
Processor
Controller
DSP 32 bit
AD/DA Converter
24 bit/96 KHz
Limiter
RMS, Peak, Thermal
Input
Signal Input
1xXLR balanced
1xRJ45 LINK (RDNet)
Signal Output
1x XLR balanced
1xRJ45 LINK (RDNet)
Power Socket
1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls
1x Input Sensitivity Rotary Encoder
1x X-Over Selection Encoder
1x Delay Selection Encoder
1x Polarity Selection Switch
1x X-Out Mode Selection Switch
1x On LED
1x Status LED
1x Signal LED
1x Limiter LED
3x RDNet Status LED
Mechanics
Housing
Multiplex plywood
Polyurea painted
Pole Mount
1x M20 on Top, 1x M20 on Right Side
Handles
1x Side
Aluminium
Rigging Points
16x M10
Width
650 mm (25.6 in)
Height
420 mm (16.5 in)
Depth
550 mm (21.7 in)
Weight
32.8 kg (72.3 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
**AES75: @1 meter, free field, with Music-Noise
