Description
The RNT: A new flagship tube microphone from sE Electronics and Rupert Neve Designs®.
Delivers the pristine, musical sonic character and uncompromising performance of the world's most prized recording equipment.
The RNT is the third microphone in the collaboration between sE Electronics and Rupert Neve Designs, founded by the legendary audio designer Mr. Rupert Neve.


Much like the RNR1 Active Ribbon and RN17 Small-Diaphragm Condenser, the RNT is something truly special, developed over several years of careful listening and measurement by Mr. Rupert Neve, Mr. Siwei Zou, and the engineering teams from both Rupert Neve Designs and sE Electronics.
All in all, this new flagship tube microphone brings the larger-than-life sounds of classic studio microphones into the modern age with greater depth and clarity than ever before.

The RNT utilizes fully discrete, Class-A electronics throughout both of its active stages.
The first stage is tube-based, with a hand-selected, low-noise ECC82 tube within the microphone chassis, and implementing a custom-built Rupert Neve Designs output transformer.

A tube has a lot of qualities which are very desirable, and it has a particular quality of sound to it."
If you get the size of the diaphragm of the microphone right, and you get the frequency response and the directional properties, and all the myriad of other qualities right, it is symbiotic with the tube’s performance."
- Mr. Rupert Neve

The second stage is within the floor box – which controls polar pattern, filter and gain switching – and is also coupled with a second custom-made Rupert Neve Designs output transformer.
This second stage is is built around the same custom op-amps used in Rupert Neve Designs’ flagship 5088 recording console, known worldwide for its unrivaled transparency and headroom.
sE's Capsule Master Hongzu Xu holding a tray of RNT capsules, hand-made in our own capsule room.
The custom handcrafted large-diaphragm true condenser capsule is the finest capsule sE has ever made, born from years of rigorous testing and listening, and developed and constructed by hand in sE’s own factory.

The Class-A electronics and switchable gain ensure a massive dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components, and the switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect.
This enables the RNT to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.

Lastly, the 9-position polar pattern switch allows for omnidirectional, cardioid, and figure-eight pickup patterns (plus several positions in between each) for precise tailoring of the balance between direct and ambient sound when recording with the RNT.
HAND-CRAFTED, GOLD-SPUTTERED 1" TRUE CONDENSER CAPSULE
-
The finest and most complex capsule sE has ever built
-
Hand-crafted and individually tuned in our very own factory
-
Refined electrode design delivers supremely natural sound quality
NINE SELECTABLE POLAR PATTERNS
-
Precisely-tuned dual-diaphragm capsule design allows you to choose the perfect setting for every application
-
Minimize unwanted signal bleed with ease
HAND-SELECTED ECC82 TUBE & CUSTOM RUPERT NEVE DESIGNS AUDIO TRANSFORMER
-
Each microphone-grade tube is carefully selected and pretested in-house
-
Allows for stunning realism and depth in recordings
-
Unique tube circuit design optimized for driving the first custom-made transformer


HAND-CRAFTED METAL HOUSING WITH PREMIUM FINISH
-
All-metal construction built with highest attention to detail
-
Efficient rejection of any electrical interference and noise
-
High quality finish ensures a great look for many years

As with all Rupert Neve Signature Series microphones, the RNT's solid brass chassis is milled in our own machine shop.




A SECOND CUSTOM-BUILT RUPERT NEVE DESIGNS AUDIO TRANSFORMER
-
Designed for sweet, musical performance and bulletproof isolation
-
Provides the legendary sonic character of Rupert Neve's famous transformers
CUSTOM-MADE, DISCRETE CLASS-A RUPERT NEVE DESIGNS AMPLIFICATION
-
Delivers the sonic character and performance expected from the world's most prized recording equipment
-
Utilizes the same operational amplifiers found in Rupert Neve Designs' flagship 5088 console
-
These discrete op-amps ensure enormous headroom, ultra-wide bandwidth, zero crossover distortion, and quality without compromise
ACTIVE GAIN STAGE WITH THREE SWITCHABLE LEVELS
-
Provides 24dB of extended dynamic range for a wide range of applications
-
Discrete Rupert Neve Designs op-amp cards ensure pristine performance
-
Suitable for everything from delicate ambience recordings to close-miking of extremely loud instruments and voices

TWO SWITCHABLE ACTIVE LOW-CUT FILTERS
-
Custom Rupert Neve Designs op-amps implemented for best possible sound quality
-
Reduce unwanted rumble or foot-fall noise, or compensate for proximity effect

The RNT is sE's new flagship large-diaphragm condenser microphone, and proudly stands alongside the RNR1 and RN17 in being what we believe are some of the finest and most unique microphones ever produced.
Capsule: Handcrafted 1" diaphragm true condenser
Tube Complement: 1x 12AU7/ECC82
Polar Patterns: 9 (omni, cardioid, figure-8, plus 3 steps between each)
Frequency range: 20 Hz - 20,000 Hz
Sensitivity: 16 mV/Pa (-36 dB)
Gain: -12 / 0 / +12 dB, switchable
Max SPL: 151 dB
Equivalent Noise Level: 18 dB(A)
Dynamic Range: 133 dB
Signal to Noise Ratio: 76 dB
Low Cut Filter: 40 / 80 Hz, 12 dB/oct, switchable
Electrical Impedance: 30 Ohms
Recommended Load Impedance: >2k Ohms
Connectivity: 3-pin male XLR connector (floor box)
Microphone Dimensions: Diameter: 62 mm (2.44 in.), Length: 240 mm (9.45 in.)
Microphone Weight: 989 g (34.90 oz.)
Floor Box Dimensions: 356 x 135 x 100 mm (14.02 x 5.31 x 3.94 in.)
Floor Box Weight: 3,905 g (137.79 oz.)
• RNT microphone
• Custom shock-mount
• RNT Floor Box (Power Supply)
• 8-pin cable (to connect mic to floor box)
• IEC power cable
• Wooden microphone box
• Flight case
• sE logo sticker
• User manual with warranty card
Estimate shipping
Refund Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with all accessories and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at boutique@seconcept.com. If your return is accepted, we’ll send you a return shipping label (at your expenses) as well as instructions on how and where to send your package back. Items sent back to us without first requesting a return will not be accepted and not refunded.
You can always contact us for any questions prior to purchase by email at: boutique@seconcept.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
All Returns must contain all associated packaging and materials (ie accessories, manuals, wires, etc). Merchandise that is not returned in brand-new condition, including damages, abuse, marks, showing wear, or with missing packaging or accessories, will be subject to additional charges. Shipping and Handling charges (delivery and return) are non-refundable, including any shipping fees not directly incurred that are part of a free shipping promotion. Any items packaged with software, including but not limited to, DJ Controllers, Audio Interfaces, etc., must be returned with the original software disc including serial number and proof of deactivation.
We cannot accept returns on liquidation, special orders, liquid, needles, parts, used, sales, open box item or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.