Description
Videographers love the TASCAM DR-10L Pro portable recorder with clip-on microphone as a simple and stealthy solution for capturing audio for video. Combining the clip-on convenience of a lavalier mic with an ultra-compact portable recorder this form factor solves many problems content creators often have. It’s a superior solution for busy events like weddings and on-location film shoots where traditional wireless lav systems can pose concerns for your workflow, and the rock-solid capability of a TASCAM wired lavalier recorder is proven and assured. The DR-10L Pro can also be an easy backup system for your typical audio recording setup thanks to simple plug-and-go operation. With the DR-10L Pros 32-bit float recording technology, you can capture a whisper, a scream, and everything in-between with impeccable fidelity, ultra-low noise, and no need to fine-tune gain levels. Support for wireless time code with Atomos products, the ability to control up to 5 units wirelessly via the app, and long battery life and generous storage capacity optimize the DR-10L Pro for professional applications.
*optional AK-BT1 needed for app control and wireless timecode
Features at a glance
- Ultra-lightweight, compact and wearable design is perfect when stealth is a priority.
- TM-10L lavalier microphone with clothing clip and windscreen included (cable length: 160cm).
- 32-bit float recording and dual AD converter technology means you’ll never need to scrap a recording due to poor audio levels, and no need to fine-tune input levels.
- Supports recording in MP3 format
- Huge storage capacity, with support for microSDXC cards up to 512GB.
- Records at least 24.5 hours on two AAA batteries*¹ for all-day video shoots.
- Optional AK-BT1 Bluetooth® adapter (sold separately) adds wireless control and synchronization.
- Free DR-10L Pro CONNECT app for iOS, iPadOS and Android allows you to control up to 5 units simultaneously *².
- Wireless time code synchronization supported with compatible Atomos products such as BLUE or CONNECT series.
*¹ Lithium battery.
*² The number of devices that can be connected may vary depending on the usage environment and radio wave conditions.
Other Features
- Screw lock mechanism securely connects the microphone connector to the recorder.
- Sliding recording switch mechanism makes it fast and easy to start recording, and prevents accidental operation during recording.
- Lock function disables all operations other than “recording stop” during recording.
- Automatic file closing function to prevent the loss of recorded data if the batteries run out.
- Automatic leveling and limiting prevent distortion caused by overloads.
- Low-cut filter reduces ambient hum and rumble (40Hz/80Hz/120Hz/220Hz).
- Easy-to-read organic EL display.
- Headphone output enables input monitoring and allows you to check recorded files.
- USB Type-C port enables connecting extra power supply and easy data exchange with computers.
- Belt clip included.
- Includes iZotope RX Elements audio production editing software.
Included Items
- DR-10L Pro
- Belt clip
- USB cable (Type A – Type C)
- TM-10L : Lavalier microphone, Microphone clip, Windscreen
- Start-up guide (including warranty)
- TASCAM ID registration guide
- iZotope RX Elements download card
Spec description
| Recorder specifications | |
| Recording media | microSD cards (64MB - 2GB), microSDHC cards (4GB - 32GB), microSDXC cards (64GB - 512GB) |
| Recording / playback formats | |
| WAV (BWF) | 44.1k/48kHz, 16/24-bit, 32-bit float |
| MP3 | 44.1k/48kHz |
| Recording | 128k/192kbps |
| Playback | 32 - 320kbps |
| Analog audio input ratings | |
| Input | |
| Connector | 3.5mm(1/8") TRS jack with screw lock |
| Maximum input level | -11dBV |
| Input gain | 7.5dB - 38dB |
| Input impedance | 2kΩ or higher |
| Lavalier microphone (TM-10L) | |
| Sensitivity | -42dBV/Pa |
| Max. SPL | 115dBSPL |
| Cable length | 1.6m |
| Analog audio output ratings | |
| Headphone output | |
| Connector | 3.5mm(1/8") stereo mini jack (Dual Mono Output) |
| Maximum output | 10mW + 10mW (THD+N 0.1% or less, into 32Ω) |
| Control input/output ratings | |
| USB port | |
| Connectors | USB Type-C |
| Format | USB2.0 HIGH SPEED mass storage class |
| Bluetooth® device connector | For Bluetooth® adapter (AK-BT1) only |
| Plug-in power (Mic bias) | 2.3V |
| Power | 2 AAA batteries (Alkaline / Ni-MH / Lithium), USB bus power |
| Power consumption (battery) | 0.3W (MAX) |
| Current consumption (USB bus power) | 0.1A (MAX) |
| Battery (RTC) | Lithium × 1 (built in with soldering) |
| Dimensions (excluding protrusions) | 53 (W) × 50.7 (H) ×21.4 (D) mm |
| Weight | 65g(including battery) / 43g (without battery) |
| Operating temperature | 0 - 40℃ |
| Included | DR-10L Pro ×1 Belt clip ×1 USB cable (Type A – Type C) ×1 TM-10L - Lavalier microphone ×1 - Microphone clip ×1 - Windscreen ×1 Start-up Guide (including warranty) ×1 TASCAM ID registration guide ×1 iZotope RX Elements download card ×1 |
Battery operation time (continuous operation)
| Batteries | Operation time | Bluetooth® | Settings |
| Alkaline batteries (EVOLTA) |
About 16.5 hours | - | Format : WAV, 48kHz, 32-bit float Mic connected Headphones not connected Limiter : OFF File type : MONO |
| About 16 hours | ✓ | ||
| Ni-MH batteries (eneloop) |
About 11.5 hours | - | |
| About 10.5 hours | ✓ | ||
| Lithium-ion batteries (Energizer Ultimate Lithium) |
About 24.5 hours | - | |
| About 23 hours | ✓ |
- JEITA CP-2905
- When using device with a headphone connected, the battery life will be reduced.
- The continuous battery operation times may vary from the values shown depending on the recording media being used.
Audio performance
| Frequency response* | 20Hz – 20kHz: +0dB/-1dB |
| Total harmonic distortion ratio (THD+N)* | 0.01% (1kHz, input: -21dBV) |
| Dynamic Range* | 105dB or higher |
*Input → SD data
Note : 0dBV=1Vrms, JEITA CP-2150
DR-10L Pro CONNECT Supported OS
iOS / iPadOS
iOS 16 / iPadOS 16, iOS 15 / iPadOS 15, iOS 14 / iPadOS 14Android
Android 13, Android 12, Android 11
