Type
Electret Condenser
Frequency Response
20 to 20,000 Hz
Polar Pattern
Half-cardioid (cardioid in hemisphere above mounting surface)
Output Impedance
150 Ω
Sensitivity
at 1kHz,open circuit voltage
-48.5 dBV/Pa(3.8 mV) [1]
Maximum SPL
1 kHz at 1% THD [2]
| 2500 Ω load |
155 dB
|
| 1000 Ω load |
151 dB
|
Signal-To-Noise Ratio [3]
64.5 dB
Dynamic Range
at 1kHz
| 2500 Ω load |
125.5 dB
|
| 1000 Ω load |
121.5 dB
|
Clipping Level
20 Hz to 20 kHz, at 1% THD
| 2500 Ω load |
12.5 dB
|
| 1000 Ω load |
7.5 dB
|
Self Noise
equivalent SPL, A-weighted, typical
29.5 dB SPL-A
Common Mode Rejection
(20 Hz to 200 kHz)
≥55 dB
Frequency Contour Switch
7 dB of attenuation centered at 400 Hz
Power Requirements
11–52 V DC phantom power [4] , 5.4 mA
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
470 g(16.6 oz.)
Connector
Three-pin professional audio (XLR), male, balanced
[1] 1 Pa=94 dB SPL [1] 1 Pa=94 dB SPL [1] 1 Pa=94 dB SPL [1] 1 Pa=94 dB SPL [1] 1 Pa=94 dB SPL
[2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL [2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL [2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL [2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL [2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
[3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
[4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity [4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity [4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity [4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity [4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity