The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
RECOMMENDED USE
Dynamic & passive ribbon microphones
HIGHLIGHTS
Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
Eight load settings ranging from 50 ohms to stunningly high 10 mega ohms to precisely match any mic
Sophisticated class-A design and specially-selected high-grade FETs for a signal boost without coloration
Vastly lower output impedance and nearly half the noise of anything else on the market to raise any mic level with clarity
All-metal housing and premium finish ensures the DM2 can handle demanding on-tour or recording/broadcast studio lifestyles
Gold plated XLR connector for loss-free reliable signal connection
Specs
Power
Electrical Impedance135 Ohms
Recommended Load Impedance>1K Ohms
Connectivity3-pin male/female XLR connector
Powering48V Phantom Power (P48 according to IEC 61938)
Sound
Frequency range10 Hz - 120 kHz (-0.3 dB)
Gain15 dB / 30 dB
Current consumption3.1 mA
Max output level (0.5% THD)9.5 dBV (3.0 V)
Output noise level1 μV @ 15 dB / 6.6 μV @ 30 dB
Dimensions
Preamp diameter19 mm (0.75 in.)
Preamp length96 mm (3.78 in.)
Preamp weight80 g (2.82 oz.)
Estimated Delivery Time
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Shop In Store
Come try your favorite dj controller in store, see the latest light effects in action! See our specialist for a good advice.
Buy Online & Pick-up Same Day
If a product shows ''Ready to Ship'' you can always select ''Pickup in store'' at checkout and come the same day at your earliest convenience
The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
RECOMMENDED USE
Dynamic & passive ribbon microphones
HIGHLIGHTS
Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
Eight load settings ranging from 50 ohms to stunningly high 10 mega ohms to precisely match any mic
Sophisticated class-A design and specially-selected high-grade FETs for a signal boost without coloration
Vastly lower output impedance and nearly half the noise of anything else on the market to raise any mic level with clarity
All-metal housing and premium finish ensures the DM2 can handle demanding on-tour or recording/broadcast studio lifestyles
Gold plated XLR connector for loss-free reliable signal connection
Specs
Power
Electrical Impedance135 Ohms
Recommended Load Impedance>1K Ohms
Connectivity3-pin male/female XLR connector
Powering48V Phantom Power (P48 according to IEC 61938)
