RME ADI-642 - 24 Bit / 192 kHz, 2 x 8-channel MADI <> AES/EBU Converter, 19", 1RU - RME ADI-642 8-Channel Rmeadi-642 - 8-Channel 24-Bit192Khz Madi Aes Format Converter With 72 X 74 Routing Matrix

RMESKU: ADI642

Price:
Sale price$3,990.00

Shipping calculated at checkout

Stock:
Usually stock at our suppliers
Interac logo Pay with Interac e-Transfer® at checkout
 More payment options

Description

24 Bit / 192 kHz, 2 x 8-channel MADI <> AES/EBU Converter, 19", 1RU. 

The ADI-642 is an eight-channel format converter from MADI to AES and vice versa. MADI handles sixty-four channels of 24-bit audio at sampling frequencies up to 48kHz, thirty-two channels up to 96kHz and sixteen channels at 192kHz. All channels are transferred across a single cable, using either a coaxial (BNC) or optical network cable. The AES/EBU channels are provided via 4 XLR inputs and outputs, respectively.

 

Amongst other applications, the unit can serve as an AES/EBU front-end for RME's Hammerfall DSP MADI PCI card. An easy-to-use 72 x 74 routing matrix can assign any individual input channel to every single output channel, allowing for the free configuration of all sixty-four MADI channels and the eight AES channels.

When the single-space rack-mount unit is serving as a format converter, cable lengths of more than 100 meters can be achieved. The ADI-642 accepts both fifty-six and sixty-four channel standards as well as 96k frame at its input and can be set to generate both these formats at its output. This way the ADI-642 can serve as an interface between otherwise incompatible MADI devices.

Eight-channel MADI/AES format converter
MADI redistributor, patchbay and router
Extensive status displays give information about Lock and Sync states, audio content and the physical quality of the incoming signal
A fully automatic input selection between optical and coaxial input offers a useful redundancy mode for critical applications
Supplies word clock in Single, Double and Quad Speed, distributes Double Wire 96kHz signals into the MADI data stream and to the AES ports and supports the double MADI sample rate (96k frame)
SyncAlign and SyncCheck technologies ensure perfect synchronization and clear detection of errors
Multiple units can be stacked and operated sample-aligned, using word clock.
All settings are stored when the unit is switched off
Sixteen MIDI channels can be transferred across MADI even with 64 audio channels
The device can be fully remote controlled and configured via MIDI and all status displays can be queried through MIDI
Each unit in a multiple-unit setup can be given a separate ID, allowing separate remote control of the devices utilizing only a single MIDI channel

RME ADI-642 Specs

ADC Not applicable
DAC 24-bit
Sample Rates Internal: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz
External: Accepts between 28kHz and 204kHz depending on clock source master
Analog Inputs No
Analog Outputs 1 x 1/4" stereo monitor output
Digital Input 4 x XLR AES/EBU (24-bit up to 192kHz)
1 x MADI Optical via FDDI duplex SC connector
1 x BNC MADI
Digital Output 4 x XLR AES/EBU (24-bit up to 192kHz)
1 x MADI Optical via FDDI duplex SC connector
1 x BNC MADI
Word Clock 1 x BNC input
1 x BNC output
Dynamic Range Monitor: 140dB RMS unweighted, 143dBA
Frequency Response Monitor: 1Hz to 20.1kHz, -0.1dB @ 44.1kHz
THD + N Monitor: -85 dB, <0.005%
Dimensions (WxDxH) 19" x 9 1/2" x 1 3/4"
Weight 4.4 lbs
Specialties The routing matrix can assign any of the 36 stereo input pairs to the monitor

Estimate shipping

You may also like

Recently viewed