Phantom Power supply and footswitch toggles condensor mic between two outputs.
TheHotShot 48VfromRadial Engineeringis a microphone switcher in a stompbox form factor. It allows the user to switch their signal from the main mix to a stage monitoring system at the press of a button, in order to communicate with bandmates or stage techs.
Say you want to sing to the audience one moment and tell your band to loop the solo section of a tune immediately thereafter. You can use the HotShot 48V for this purpose, toggling between the main monitoring output on connection A, and the stage-monitoring system on connection B. Now you can cue your band without letting the audience in on the secret.
The HotShot 48V has one XLR input jack and two XLR output jacks. You'll note the 48V phantom power button as well as the ground-lift switch and a latch button that changes the operation of the pedal. A power adapter is included.
To ensure a seamless performance, the HotShot 48V features an isolation transformer on the XLR input along with a time delay microcontroller for completely noiseless switching with no pops or clicks through the PA.
For microphones that require phantom power to operate, simply press the 48V switch on the rear panel of the HotShot 48V. The red LED below this switch will light to indicate that good phantom power is being provided.
By default, the Toggle footswitch on the HotShot 48V is a momentary switch. This means that it only switches to B as long as the footswitch is depressed, and once you take your foot off the switch it will immediately revert back to Output-A. This switch can also be configured for latching operation. To do so, press the LATCH switch on the rear panel. In this mode a single press of the Toggle footswitch will switch the microphone to Output-B, requiring a second press of the footswitch to switch back to Output-A.
The HotShot 48V can be used as an on-stage mute switch by simply leaving Output-B disconnected from the sound system. This allows the mic to be silenced whenever the toggle footswitch is depressed, providing a simple solution for headset and lavalier mic users.
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Shop In Store
Come try your favorite dj controller in store, see the latest light effects in action! See our specialist for a good advice.
Buy Online & Pick-up Same Day
If a product shows ''Ready to Ship'' you can always select ''Pickup in store'' at checkout and come the same day at your earliest convenience
Phantom Power supply and footswitch toggles condensor mic between two outputs.
TheHotShot 48VfromRadial Engineeringis a microphone switcher in a stompbox form factor. It allows the user to switch their signal from the main mix to a stage monitoring system at the press of a button, in order to communicate with bandmates or stage techs.
Say you want to sing to the audience one moment and tell your band to loop the solo section of a tune immediately thereafter. You can use the HotShot 48V for this purpose, toggling between the main monitoring output on connection A, and the stage-monitoring system on connection B. Now you can cue your band without letting the audience in on the secret.
The HotShot 48V has one XLR input jack and two XLR output jacks. You'll note the 48V phantom power button as well as the ground-lift switch and a latch button that changes the operation of the pedal. A power adapter is included.
To ensure a seamless performance, the HotShot 48V features an isolation transformer on the XLR input along with a time delay microcontroller for completely noiseless switching with no pops or clicks through the PA.
For microphones that require phantom power to operate, simply press the 48V switch on the rear panel of the HotShot 48V. The red LED below this switch will light to indicate that good phantom power is being provided.
By default, the Toggle footswitch on the HotShot 48V is a momentary switch. This means that it only switches to B as long as the footswitch is depressed, and once you take your foot off the switch it will immediately revert back to Output-A. This switch can also be configured for latching operation. To do so, press the LATCH switch on the rear panel. In this mode a single press of the Toggle footswitch will switch the microphone to Output-B, requiring a second press of the footswitch to switch back to Output-A.
The HotShot 48V can be used as an on-stage mute switch by simply leaving Output-B disconnected from the sound system. This allows the mic to be silenced whenever the toggle footswitch is depressed, providing a simple solution for headset and lavalier mic users.
SKU:
$379.99
×
Offerly Support
Don't fret! This pop up only shows up in Shopify Editor Mode. Offerly could not find your add to cart button! This can happen for one of the following reasons:
1.
This product is sold out.To solve this please navigate to a different product!
2.
Your Theme is custom or uses different text for the "Add to Cart" button.If this is the case, please contact support and we will add support for your theme!
