Roll over image to zoom in Click on image to zoom

TASCAM ML-32D Dante Interface

Name: TASCAM ML-32D Dante Interface
Brand: TASCAM
SKU: ML-32D
Price: 5209.00 CAD
Availability: InStock

TASCAMSKU: ML-32D

Price:

$5,209.00

Shipping calculated at checkout

Stock:

Available to order from our supplier!

Quantity:

Pay with Interac e-Transfer® at checkout

Share this product

32-channel Analog/Dante Converter

ML-32D

A powerful and flexible solution

The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.

The ML-32D has four D-Sub inputs and four D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.

Features at a glance

32-channel analog line input/output
Equipped with Dante interfaces
1. Dante primary and secondary connectors support redundancy
2. Compatible with SMPTE ST 2110-30
3. AES67 is also supported. Possible to connect with AES67-compatible network audios including Ravenna
4. Dante Controller enables flexible routing
Supports up to 96kHz/24bit
Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
5 selectable reference levels which can accommodate to a variety of scenes including professional usages, public addresses, and usages in broadcasting studios
Equipped with a STATUS indicator for indicating failures and errors of the device
Firmware update via a Dante interface is possible
Equipped with D-sub 25-pin connectors as line input/output connectors
1U rack mount size
Using an optional BO-32DE (D-sub/Euro Block breakout box) enables supporting Euro Block connectors which are optimal for professional usages
Using an optional BO-16DX/IN and BO-16DX/OUT (D-sub/XLR breakout box) enables supporting XLR connectors which have multiple usages including usage as a stage box.

Spec description

	ML-32D	ML-16D
Formats
Sampling frequency	44.1k / 48k / 88.2k / 96k Hz
Quantization bit rate	16 / 24-bit
Analog Inputs/Outputs
LINE INPUTS
Connector	D-sub 25pin female × 2
Locking screws	No.4-40 UNC (inch type)
Nominal input levels	+4dBu, +6dBu (only when maximum input level is +15dBu)
Maximum input levels	+24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches)
Input impedance	10kΩ or higher
LINE OUTPUTS
Connector	D-sub 25pin female × 2
Connector	No.4-40 UNC (inch type)
Output impedance	200Ω or lower
Applicable load impedance	2kΩ or higher
Nominal output levels	+4dBu, +6dBu (only when maximum output level is +15dBu)
Maximum output levels	+24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches)
PRIMARY/SECONDARY
Connector	RJ-45 × 2
Transmission protocol	Dante
Gigabit Ethernet standard	1000BASE-T (IEEE 802.3ab)
Cables	Category 5e or faster STP cables
Power	AC 100 - 240V, 50/60Hz
Power consumption	22W	14W
Dimensions (W×H×D)	19.0" × 1.77" × 11.96" / 483 × 45 × 303.8 mm
Weight	7.7 lbs. / 3.5 kg	7.3 lbs. / 3.3 kg
Operating temperature range	32˚F to 104˚F / 0˚C to 40˚C
Standard accessories	Power cord, Rackmount screw kit, Owner’s Manual (including warranty)

Audio performance

ANALOG IN → Dante OUT

Frequency response	20Hz to 20kHz +0.1dB/–0.5dB (–16dBFS input, 44.1k/48kHz sampling frequency, JEITA) 20Hz to 40kHz +0.1dB/–0.5dB (–16dBFS input, 88.2k/96kHz sampling frequency, JEITA
Distortion (THD+N)	0.001% or lower (–1dBFS input, 1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
S/N ratio	113dB or higher (44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
Crosstalk	115dB or higher (1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)

Dante OUT → ANALOG IN

Frequency response	20Hz to 20kHz +0.1dB/–0.5dB (–16dBFS input, 44.1k/48kHz sampling frequency, JEITA) 20Hz to 40kHz +0.1dB/–1.0dB (–16dBFS input, 88.2k/96kHz sampling frequency, JEITA)
Distortion (THD+N)	0.001% or lower (–1dBFS input, 1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
S/N ratio	110dB or higher (44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
Crosstalk	115dB or higher (1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.