TheIQ-10 2500W 10, 2-Way Speaker SystemfromBehringerbelongs to the world's first ULTRANET equipped 2,500W digital loudspeakers -- the Behringer iQ Series. You can run a single CAT5 cable from your X32 to all your ULTRANET-enabled systems -- S16 Digital Snake, iQ Series FOH loudspeakers and subwoofers, iQ Series loudspeakers, and even your P16 Personal Monitoring system. Devoid of ground loops and interference, you get pristine, crystal-clear audio via multi-channel and an all-digital ULTRANET signal distribution. Lightweight and portable, this 2-way speaker system from the iQ Series can be used in traditional analog systems as well.
Audio excellence, combined with industry-leading technologies gives the IQ-10 speaker system an impressive power-to-weight ratio and sonic performance. Thanks to its onboard 2-channel mixers, USB-addressable DSP, 2,500W Class-D power, and TURBOSOUND-designed low/high-frequency drivers, the IQ-10 speaker system delivers sound that is smooth and crisp with punch, definition, and vocal detail.
The IQ-10 speaker system is equipped with KLARK TEKNIK DSP power, ensuring total system control and driver protection. This dynamic digital engine commands a phase/time-correction crossover, EQ, noise gate, automatic feedback eliminator, and much more to maintain optimal performance. DSP setup and adjustment scan be done directly at the amplifier, thanks to a convenient rear panel LCD in this speaker system or even remotely using a PC and Behringer's free software download. The IQ-10 speaker system is equipped with iNUKE power amplifiers, 1 per subwoofer, and 2 per bi-amplified loudspeaker-each packing an incredible 2,500W. Thanks to its integrated fly-points, the IQ-10 speaker system can be suspended via optional hardware or ground stacked on its subwoofers to suit the venue. This iQ Series speaker system provides outstanding low-frequency extension, sonic clarity, and output typically associated with much larger speaker systems, plus advanced intelligent DSP and remote control.
In addition to XLR and 1/4, TRS inputs, each iQ loudspeaker is incorporated with Behringer's proprietary ULTRANET technology. ULTRANET uses CAT5 cables to transmit multi-channel audio signals and other information between other ULTRANET enabled products. With the built-in ULTRANET multi-channel signal chain, you can run a single CAT5 cable from your S16 Digital Snake to your P16 personal monitor network, daisy-chain to the IQ-10 loudspeakers (used as mains and floor monitors), and to broadcast feeds, etc. It is also provided with Neutrik powerCON twist-lock connectors to eliminate potential AC power disconnects and ground faults. And since digital transmission does not fall prey to RFI (Radio Frequency Interference) or ground loop issues, you will experience a hum-and-noise-free sound reproduction.
Lightweight and powerful, the IQ-10 speaker system issuitable for both speech and music applications.
Ultra-high power, 2-way sound reinforcement speaker system with M10 suspension points
Lightweight and fiberglass reinforced composite enclosure provides excellent sound even at extreme sound pressure levels
World-class TURBOSOUND drivers for high-end audio performance
High-acceleration 10", low-frequency driver provides deep bass and acoustic power
1.75, titanium-diaphragm compression driver for exceptional high-frequency reproduction
Advanced KLARK TEKNIK digital signal processor for ultimate system control: speaker modeling includes accurate models of industry standard speakers
Digital crossover, EQ, phase and time correction, and Automatic Feedback Eliminator
Direct-access LCD management and full USB remote control via PC or Mac computer
ULTRANET digital audio network connects to BEHRINGER X32 and P16 Personal Monitor system
iNUKE Class-D amplifier technology promotes power and incredible sonic performance
2 Mic/Line inputs (XLR and 1/4, TRS) with individual volume controls and peak LEDs
Mix output enables linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning - stand mounting with dual 35mm pole sockets, tilts on its side for use as a floor monitor, M10 fly points, pull backs and yoke-mount options
High-quality components and rugged construction ensure long life
Re,ponse en fre,quence |
55 Hz - 18 kHz ±, 3 dB 50 Hz - 20 kHz -10 dB |
Dispersion nominale |
90 °, H x 60 °, V @ les points a, -6 dB |
SPL maximum |
123 dB de crê,te |
Type Crossover |
Actif |
Transducteurs |
1 x 10 ",(256 mm) du pilote LF 1 x 1 ",(25,4 mm) pilote de compression HF |
Limiteur |
HF inde,pendante, LF, le pic et efficace |
Puissance de sortie maximale * |
2500 W |
Type |
Classe-D |
Protection |
Court-circuit, circuit ouvert, thermique |
Entre,e A / B |
Prise combo 2 x / XLR |
Sensibilite, |
Ligne 4 dBu, micro -22 dBu, commutable |
Impe,dance d'entre,e |
20 kQ de,se,quilibre,, 40 kQ e,quilibre, |
Niveau d'entre,e maximal |
21 dBur |
Sortie A / B |
2 x XLR Lie, a, l'entre,e |
Me,langer sortie |
XLR, syme,trique |
Impe,dance de sortie |
100 O de,se,quilibre,e, 200 O e,quilibre, |
Entre,e Ultranet / link |
2 x RJ45 |
Alimentation secteur |
Neutrik entre,e powerCON 20A et 15A lien |
DSP |
Rotary push-codeur Boutons pour PROCESSUS, SETUP, EXIT, ENTRER |
Section Mixer |
2 x contrô,les de gain (canaux A et B) 2 x ligne / MIC |
pre,re,glages EQ d'usine |
Positionnement, le mode Sound, la mode,lisation sonore, FBQ |
Exposition |
LCD 128 x 32, re,troe,claire, bleu |