Mini 360 F14 Clamp
Global Truss Mini 360 F14 Clamp CJS2001
Light Duty 20mm 0.78-Inch Clamp
Great for small lighting fixtures or light duty applications
For F14 Mini Square Aluminum Truss
Fits F31, F32, F33, F34 Diagonal Cross Bars
Minimum Tube Size 18mm
Maximum Tube Size 20mm
Maximum Load 10 Kgs.
Profile Width 20mm
Weight – 0.06 Lbs.
The Mini 360 F14 Clamp fastens from 18mm 0.70-Inch to 20mm 0.78-Inch.
How to attach Mini 360 F14 Clamp to Trussing, Tube, or Pipe
1. Release the wing nut by turning it counterclockwise to release the bolt and open the collar.
2. Place the Mini 360 F14 Clamp on the Truss, Tube, or Pipe and close the collar.
3. Put the bolt back in place with the washer and wing nut above the collar.
4. Make sure the Mini 360 F14 Clamp is located in its proper area of the Truss, Tube, or Pipe before tightening the wing nut.
5. Turn the wing nut clockwise to tighten and secure the Mini 360 F14 Clamp into place.
Do not exceed the load capacity of the Mini 360 F14 Clamp or Truss System. The Mini 360 F14 Clamp should be fully inspected before use. If any damage or defect occurs, the Mini 360 F14 Clamp should not be used. The use ofsafety cable s is recommended for maximum security. The purchase of this product in no way shall be conceived as authorizing or approving a specific installation or usage of the clamp. A licensed professional engineer shall review all structures, lighting plots, or other clamp uses.
