Condenser Gooseneck Microphone with 3-Pin Flush-Mount Power Module
ES925/FM3
Modular microphone system includes acardioid condenser microphone element, 21.08" gooseneck and 3-pin flush-mount power module
ES925/FM3
The ES925/FM3 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a condenser microphone element, gooseneck, and a 3-pin flush-mount power module.
Each component is interchangeable with other ES modular microphone components, allowing you to mix and match power module types (XLR, FM3, FM5, DS5), gooseneck lengths (4.85", 9.08", 12.08", 15.08", 18.08", 21.08"), and microphone polar patterns (MicroLine®, hypercardioid, cardioid, omnidirectional).
The ES925/FM3 microphone’s low-profile element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The included foam windscreen protects against plosives. The 3-pin flush-mount power module is equipped with a capacitive touch switch that enables local muting of the microphone. The power module mounts unobtrusively in tabletops and comes with isolators that provide mechanical dampening of the mounting surface. Both the power module and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.
Each component is interchangeable with other ES925 modular microphone components, allowing you to customize your build.
Power Modules
3-pin XLR (XLR)
3-pin flush-mount (FM3)
5-pin flush-mount (FM5)
5-pin desk stand (DS5)
Gooseneck Lengths
4.85", 9.08", 12.08", 15.08", 18.08", 21.08”
Microphone Polar Patterns
MicroLine®, (90° acceptance angle)
Hypercardioid (100° acceptance angle)
Cardioid (120° acceptance angle)
Omnidirectional (120° acceptance angle) also available
Modular microphone system includes a microphone element, gooseneck and power module each interchangeable with components from other ES Modular Microphones
Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
Capacitive touch switch enables local muting of the microphone
Power module with 3-pin XLR output mounts unobtrusively in tabletops
Designed for professional sound reinforcement and other commercial sound applications
Interchangeable condenser microphone elements provide full-range, natural sound
Included isolators provide mechanical dampening of mounting surface vibration
Available interchangeable elements permit angle of acceptance from 90° to 360°
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Includes foam windscreen
Available in six lengths
Microphones
Element
Fixed-charge back plate, permanently polarized condenser
Frequency Response
30-20,000 Hz
Open Circuit Sensitivity
-40 dB (10.0 mV) re 1V at 1 Pa
Maximum Input Sound Level
140 dB SPL
Dynamic Range
112 dB
Signal-to-Noise Ratio
66 dB
Phantom Power Requirements
22-52V DC
Switches
LED Color x 2: mic on, mic off
Current Consumption
8 mA
Weight
ES925C6/FM3: 110 g (3.9 oz) ES925C12/FM3: 134 g (4.7 oz) ES925C15/FM3: 139 g (4.9 oz) ES925C18/FM3: 144 g (5.1 oz) ES925C21/FM3: 149 g (5.3 oz) ES925C24/FM3: 154 g (5.4 oz)
Dimensions
ES925C6/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 207.6 mm (8.17") H ES925C12/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 315.0 mm (12.40") H ES925C15/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 391.2 mm (15.40") H ES925C18/FM3: 38.0 mm (1.
