![DPA Microphones 3511ES - [3511ES] Cardioid Kit for 4011ES - DPA Microphones 3511ES Stereo Kit w/4011ES Cardioid Mics](http://seconcept.com/cdn/shop/products/3511ES_CardioidKitfor4011ES.jpg?v=1679506004&width=918)
![DPA Microphones 3511ES - [3511ES] Cardioid Kit for 4011ES - DPA Microphones 3511ES Stereo Kit w/4011ES Cardioid Mics](http://seconcept.com/cdn/shop/files/1433245275_1132271_500x_bad79e68-04c1-4810-9da1-1bc189dc935d.jpg?v=1706810182&width=500)
![DPA Microphones 3511ES - [3511ES] Cardioid Kit for 4011ES - DPA Microphones 3511ES Stereo Kit w/4011ES Cardioid Mics](http://seconcept.com/cdn/shop/products/3511ES_CardioidKitfor4011ES_1024x.jpg?v=1679506004)
![DPA Microphones 3511ES - [3511ES] Cardioid Kit for 4011ES - DPA Microphones 3511ES Stereo Kit w/4011ES Cardioid Mics](http://seconcept.com/cdn/shop/files/1433245275_1132271_500x_bad79e68-04c1-4810-9da1-1bc189dc935d_1024x.jpg?v=1706810182)
Description
The 3511ES Stereo Kit from DPA features two compact 4011ES cardioid microphones with active side cables, which have been factory-matched within ±1 dB for frequency response and sensitivity in the microphone's entire frequency bandwidth. The kit can be used to capture audio for close-up applications such as acoustic guitars, grand pianos, overheads, percussion, wind instruments, vocals, spot-miking symphonies, and more.
The 4011ES cardioid microphone can handle very high sound levels. The flat on-axis frequency response delivers a faithful reproduction of the original sound, and the off-axis response is also smooth. Both mics in the pair of 4011ES cardioids have a linear frequency response, and this offers several set-up options such as ORTF and XY configurations.
The 3511ES kit includes two 4011ES mics, a CXO4000 compact XY/ORTF stereo holder, a UA0897 shockmount, an extension for the CXO4000, two foam windscreens, two suspension mounts, two GM1500 gooseneck mounts, two mic clips, and two magnet bases for mic holders. With these accessories, the kit is more flexible and provides further positioning options such as fixing the two 4011ES mics in one mount. The kit can also be used for close-miking and distant mic placement.
The 4011ES Cardiod Microphone with Active Side Cable from DPA is designed for capturing audio. It can be used with vocals, close miking instruments, amplifier cabinets, and similar sources in live sound reinforcement and recording applications. The microphone features a cardioid condenser element for minimizing off-axis noise in spot-miking applications, allowing for use in close-miking scenarios and to minimize bleed from other instruments. The 4011ES is powered by 48V of phantom power and offers a frequency range of 20 Hz to 20 kHz. It is capable of handling high SPLs without distortion and uses an MMP preamp with a 12mm XLR cable. A foam windscreen and SM4000-C suspension mount are included.
Get the sound you want, by having the right microphone mount and the right mics. DPA designs this Compact XY/ORTF Stereo Holder for advanced sound reproduction. It brings boom sound, mono compatibility, and convenient compatibility with windscreens. In ORTF stereo, use this holder for close miking pianos, overheads for drum kits, orchestras, and ambient sound recordings.
The holder allows you to arrange mics in both a coincident XY stereo configuration as well as in a near-coincident ORTF combined time and intensity difference stereo configuration. It comes with three common international-standard threads to easily secure the holder shaft to a range of microphone stands. DPA delivers extreme quality; start here.
The DPA Microphone Shock Mount UA0897 is designed for use in environments where vibration levels are unusually high. The shock mount features anti-vibration technology that minimizes movement, but does not affect acoustic quality. This unit is ideally suited for stand-mounted use in the studio or hand-held boom applications. This model comes standard with DDS0731 Rubber Mounts for 19mm microphones. It is also fitted with a thread adapter that accepts three of the most popular international standard threads used on microphone stands.
The DPA Microphones EXY4000 Extension for Compact Stereo Holder is intended for use with compact stereo holders (i.e., the DPA CXY4000 and CXO4000) if rubber suspension is needed.
The DUA0041 from DPA is a foam windscreen for d:dicate microphones with an active cable. It can be used to provide protection against wind and pop noises without attenuating the higher frequencies beyond the tolerance field of the microphone's frequency response. In addition, it protects the mic capsule from moisture.
The DPA Microphones SM4000-C Suspension Mount is designed for compact, reference standard microphones with an MMP-C pre-amplifier. This mount allows the microphone to hang from its cable and then be oriented in any direction desired by bending the holder.
Meant to be mounted in a piano frame (or any other magnetic surface), the DPA GM1500 Gooseneck Mount is a combination of magnet mount gooseneck and shock mount. Both omni-directional and directional microphones that are compact as well as larger fit this line. Based on the Rycote Lyre suspension system, almost any microphone can be used simply by adding another Lyre rubber piece. The shock mount is extremely flexible, the holders can be mounted facing both upside and downside and the poles can be adjusted by pushing them back and forth. The DAO4010 microphone cable using Mogami compact cable and an ultra slim DPA XLR housing will give an excellent visual elegance, adding only a few millimeters further length to the microphone. Most of the connector will be locked and hidden in the microphone itself.
DPA Microphones 4011ES Cardioid Microphone With Active Side Cable Specs
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Diaphragm | 0.75" / 19 mm |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 144 dB SPL |
| Impedance | 100 Ohms |
| Load Impedance | 2 Kilohms |
| Sensitivity | -40 dB at 1 kHz |
| Dynamic Range | 121 dB |
| Signal-to-Noise Ratio | 76 dB A-Weighted |
| Equivalent Noise Level | 18 dB A-Weighted 25 dB ITU-R 468 |
| THD | < 1% |
| CMRR | 40 dB |
| Operating Voltage | 48 V ± 4 V |
| Operating Current Consumption | 3.5 mA |
| Operating Temperature | -40 to 113°F / -40 to 45°C |
| Operating Humidity | 90% |
| Dimensions | ø: 0.75 x L: 1.38" / ø: 19 x L: 35 mm |
| Weight | 3.84 oz / 109 g |
| Package Weight | 1.4 lb |
| Box Dimensions (LxWxH) | 12 x 7.7 x 3.8" |
DPA Microphones Compact XY/ORTF Stereo Holder Specs
| Package Weight | 0.25 lb |
| Box Dimensions (LxWxH) | 7.4 x 4.6 x 2.7" |
DPA Microphones Microphone Shock Mount UA0897 Specs
| Construction | Not Specified by Manufacturer |
| Finish | Black |
| Package Weight | 0.3 lb |
| Box Dimensions (LxWxH) | 7.48 x 4.646 x 2.677" |
DPA Microphones EXY4000 Extension For Compact Stereo Holder Specs
| Diameter | 0.75" (19mm) |
| Construction | Rubber |
| Package Weight | 0.05 lb |
| Box Dimensions (LxWxH) | 5 x 4 x 1" |
DPA Microphones DUA0041 Foam Windscreen For D:Dicate Microphones With Active Cable Specs
| Material | Foam |
| Package Weight | 0.02 lb |
| Box Dimensions (LxWxH) | 3.75 x 2.85 x 1.4" |
DPA Microphones SM4000-C Suspension Mount For MMP-C Preamplifier Specs
| Package Weight | 1 lb |
| Box Dimensions (LxWxH) | 6 x 6 x 4" |
DPA Microphones GM1500 Gooseneck Mount Specs
| Package Weight | 0.3 lb |
| Box Dimensions (LxWxH) | 7.4 x 4.6 x 2.8" |
DPA Microphones MB1500 Magnet Base For Microphone Holder Specs
| Package Weight | 1 lb |
| Box Dimensions (LxWxH) | 6 x 6 x 2" |
Estimate shipping
Refund Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with all accessories and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at boutique@seconcept.com. If your return is accepted, we’ll send you a return shipping label (at your expenses) as well as instructions on how and where to send your package back. Items sent back to us without first requesting a return will not be accepted and not refunded.
You can always contact us for any questions prior to purchase by email at: boutique@seconcept.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
All Returns must contain all associated packaging and materials (ie accessories, manuals, wires, etc). Merchandise that is not returned in brand-new condition, including damages, abuse, marks, showing wear, or with missing packaging or accessories, will be subject to additional charges. Shipping and Handling charges (delivery and return) are non-refundable, including any shipping fees not directly incurred that are part of a free shipping promotion. Any items packaged with software, including but not limited to, DJ Controllers, Audio Interfaces, etc., must be returned with the original software disc including serial number and proof of deactivation.
We cannot accept returns on liquidation, special orders, liquid, needles, parts, used, sales, open box item or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.