• The low-profile black BP893xcH condenser earset mic is built for intelligible, natural vocal reproduction, especially when improved gain-before-feedback over lavalier microphones is desired. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect. 
• The bodypack transmitter features a rugged Hirose 4-pin cH-style connector, which provides secure connection to compatible lavalier mics, headworn mics, and cables.
• The transmitter's input accepts low-impedance microphone levels as well as high-impedance musical instrument or line levels. The gain ranges from -10 to +20 dB and can be adjusted in 2 dB increments.
• The bright OLED screen presents comprehensive setup and operating information, including battery indicator, mute status, and operating frequency. Setup functions are menu-driven via soft-touch controls, which are covered to prevent accidental changes.
• A tactile mute toggle switch (defeatable) provides physical confirmation of mute status when transmitter display is not visible.
• The transmitter easily syncs to the receiver via infrared with a quick press on the Sync button.
• Two RF power output settings are available: the low-level setting extends battery life while the high-level offers a stronger RF signal link.
• In case of interference, the programmable multifunction button on the transmitter can be used to switch to a clean, backup frequency with minimal interruption.
• The transmitter operates for up to 9 hours on two AA alkaline batteries and up to 9.5 hours on two rechargeable AA NiMH batteries.
• Charging terminals on the base of the transmitter work with the optional ATW-CHG3 charging dock or ATW-CHG3N networked charging dock to recharge AA NiMH batteries.
• The durable metal chassis is equipped with a field-replaceable whip antenna and a secure, locking battery compartment door.

• The wide 60 MHz UHF bandwidth gives you 2400 selectable frequencies to choose from for interference-free audio transmission in an increasingly congested RF environment.
• To prevent dropouts, the receiver's true-diversity reception compares incoming signals on two independent receiver circuits to ensure optimal RF quality.
• Auto-frequency scanning automatically selects the most appropriate frequency for the area in which the wireless is operating.
• Pre-coordinated frequency scan groups are available to simplify selection of usable frequencies in a multichannel wireless setup.
• The bright, dual-mode OLED display can be switched between two modes: the standard view provides continuous indication of RF signal strength, frequency, mute status, audio modulation level, and transmitter information, while the performance view highlights key metering.
• The display also shows the transmitter's battery life and mute status.
• Settings can be quickly adjusted using the control dial and BACK button located on the receiver's front panel. Settings can also be locked to prevent accidental changes.
• The BNC sockets for the two detachable antennas provide bias power to active remote antennas and other in-line RF devices.
• The ground-lift switch on the back panel helps eliminate audible hum caused by ground loops.
• One balanced XLR and one unbalanced 1/4" audio outputs let you connect the receiver to a mixing board or PA system.
• The half-rack receiver chassis can be mounted alone in a standard 19" rack using the included mounting brackets and screws.

• Adding a pair of ATW-A49 LPDA directional remote antennas increases the range of your system and offers more protection against interference.
• The optional RF Venue DISTRO4 four-channel antenna distribution system allows you to distribute the RF signal from the remote antennas to four discrete 3000 Series receivers.

• The AT831-cH cardioid lavalier mic that provides crisp, full-sounding voice pickup.

Vocalists/Presenters

• The ATW-T3202 handheld transmitter/mic is available with a variety of mic capsules for presenters and performers who prefer the flexibility of a handheld microphone.

Guitarists

• The AT-GcH guitar cable lets you connect the bodypack transmitter to a guitar or bass.

• Audio-Technica ATW-3211/893X Specs

  System

  Wireless Transmission	Analog UHF
  Number of RF Channels	2400
  Included Transmitters	1 x Bodypack
  Diversity	True Diversity
  RF Frequency Band	EE1: 530 to 589.975 MHz
  RF Bandwidth	60 MHz
  Frequency Step Size	25 kHz
  RF Channel Scanning	Auto-Scan
  Max Operating Range	328.1' / 100 m
  Max Systems per Setup	40
  Dynamic Range	115 dB (Mic Input) 112 dB (Instrument Input)
  Encryption	None
  Deviation	±38 kHz
  Modulation	FM

  Receiver

  Form Factor	Tabletop
  Mounting Options	Rackmount (with Included Hardware)
  Rackmount Size	1 RU (1/2 Rack)
  Antenna	2 x External, BNC (Rear-Mount)
  Antenna Bias Voltage	12 VDC, 160 mA (Combined)
  Number of Audio Channels	1
  Audio I/O	1 x XLR 3-Pin Male Balanced Output 1 x 1/4" Female Unbalanced Output
  Gain Range	-60 to 0 dB (2 dB Steps)
  Audio Output Level	XLR Output: +14 dBV 1/4" Output: +8 dBV
  Frequency Response	31 Hz to 15.5 kHz (Dependent on Mic)
  Power Requirements	AC/DC Power Adapter
  AC/DC Power Adapter	12 VDC at 1 A, Center-Positive (Included)
  AC Input Power	100 to 240 VAC, 50 / 60 Hz
  Display & Indicators	1 x Backlit OLED (AF Level, Channel, Frequency, Mute, RF Level, Transmitter Battery Status)
  Dimensions	8.3 x 1.7 x 7.5" / 210 x 43.4 x 191 mm
  Weight	38.8 oz / 1100 g

  Transmitter 1
  Transmitter

  Form Factor	Bodypack
  RF Output Power	10 / 30 mW (Switchable, at 50 Ohms)
  Audio I/O	1 x Hirose cH-Style 4-Pin Male Input (Lockable)
  Muting	Mute Switch
  Gain Range	-10 to +20 dB (2 dB Steps)
  Signal Processing	High-Pass Filter: 125 Hz, 12 dB/Octave Slope
  Sync Method	IR
  Antenna	1 x Flexible Whip, Detachable (Beltpack)
  Power Requirements	Battery
  Battery Type	2 x AA (Not Included)
  Approx. Battery Life	Low: 9 Hours (Alkaline) 9.5 Hours (NiMH Rechargeable) High: 8 Hours (Alkaline) 9 Hours (NiMH Rechargeable)
  Display & Indicators	1 x Backlit OLED (Battery Status, High-Pass Filter, Mute, RF Output Power)
  Housing	Metal
  Dimensions	2.5 x 0.9 x 3.2" / 64 x 23 x 82 mm
  Weight	3.6 oz / 102 g (without Batteries)

  Microphone

  Form Factor	Earset
  Color	Black
  Sound Field	Mono
  Capsule	Electret Condenser
  Polar Pattern	Omnidirectional
  Frequency Range	20 Hz to 20 kHz
  SNR	63 dB
  Maximum SPL	131 dB SPL
  Dynamic Range	100 dB
  Output Connectors	1 x Hirose cH-Style 4-Pin Female (Lockable)
  Cable Length	55.12" / 1.4 m
  Operating Voltage	2.5 to 10 V
  Operating Current Consumption	0.2 mA
  Length	0.37" / 9.5 mm
  Diameter	0.10" / 2.6 mm
  Weight	0.07 oz / 2 g