With its smooth on-axis tone, great off-axis rejection, and straightforward operation, theAudio-Technica AT875Rshort shotgun microphone is well suited for budget-conscious indie films, TV shoots, nature recording, and documentary projects where simplicity and quality sound are prioritized.
The AT875R's high sensitivity allows it to perform reliably with a variety of microphone preamp classes. Its full-spectrum frequency response utilizes a gentle increase in high frequencies to enhance intelligibility and compensate for loss in clarity resulting from wind protection.
The durable housing ensures rugged dependability while maintaining a light weight that won't burden your boompole or camera, and the included accessories accommodate mounting the AT875R to a mic stand, boompole, or camera-mount microphone holder.
Quality Sound
Being less than 7" long, the AT875R is equally at home on a boompole or atop a camera. It uses an interference tube and a supercardioid polar pattern to yield focused on-axis directionality while attenuating rear-entry sound and rejecting sound at the sides. This makes the AT875R far more effective at capturing distant sources than the omnidirectional mics found in most cameras. Its 90 Hz to 20 kHz frequency response naturally reduces problematic bass frequencies from common sources such as traffic rumble and wind noise.
11 to 52 VDC Phantom Powered
With a balanced 3-pin XLR output and support for 11 to 52 VDC phantom powering, the AT875R is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.
Ideal for Boompole Mounting
The AT875R includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the AT875R in the Audio-Technica AT8415 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic. The AT875R also includes two rubber O-rings that expand the microphone's diameter to fit the larger mic holders found on many high-end cameras.
Windscreen Minimizes Wind Noise
The AT875R has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 12 cm Super-Softie, which also provides high immunity to rain.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the separately available Rycote Windshield Kit 3, a complete windjammer, windshield, and shockmount suspension system.
Audio-Technica AT875RSpecs
Microphone
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Line Gradient
Capsule
1 x Electret Condenser
Polar Pattern
Lobar, Supercardioid
Orientation
End Address
Circuitry
Solid-State
Pad
None
High-Pass Filter
None
Tone Adjustment
None
Indicators
None
On-Board Controls
None
Windscreen
Foam (Included)
Performance
Frequency Range
90 Hz to 20 kHz
Maximum SPL
127 dB SPL (1 kHz, 1% THD)
Off-Axis Rejection
5 dB at 60° >25 dB at 120° >20 dB at 180°
Impedance
100 Ohms
Sensitivity
-30 dBV/Pa
Dynamic Range
107 dB (Typical, 1 kHz, at Max SPL)
Signal-to-Noise Ratio
74 dB (1 kHz, at 1 Pa/94 dB SPL)
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin Male (on Mic)
Power
Operating Voltage
11 to 52 V (Phantom Power)
Operating Current Consumption
2 mA
Physical
Color
Black
Mounting
3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Certifications
RoHS, as per Manufacturer
Dimensions
ø: 0.83 x L: 6.89" / ø: 21 x L: 175 mm
Weight
2.8 oz / 79 g
Packaging Info
Package Weight
0.825 lb
Box Dimensions (LxWxH)
9.55 x 5.2 x 2.85"
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Shop In Store
Come try your favorite dj controller in store, see the latest light effects in action! See our specialist for a good advice.
Buy Online & Pick-up Same Day
If a product shows ''Ready to Ship'' you can always select ''Pickup in store'' at checkout and come the same day at your earliest convenience
