Recommended for professional recording and critical applications in broadcast, this versatile microphone may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
The AT4049b consists of two modular subassemblies: an AT4900b-48 body and an AT4049b-EL omnidirectional head capsule (both available separately). Additional interchangeable capsules are available in cardioid (AT4051b-EL) and hypercardioid (AT4053b-EL).
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Omnidirectional polar pattern provides maximum ambient pickup
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Microphones
Element
Externally polarized (DC bias) capacitor
Polar Pattern
Omnidirectional
Frequency Response
20-20,000 Hz
Low Frequency Roll Off
80 Hz, 18 dB/octave
Open Circuit Sensitivity
-34 dB (19.9 mV) re 1V at 1 Pa
Maximum Input Sound Level
145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Noise
16 dB SPL
Dynamic Range
129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio
78 dB, 1 kHz at 1 Pa
Phantom Power Requirements
48V DC, 4.8 mA typical
Switches
Flat, roll-off; 10 dB pad (nominal)
Weight
130 g (4.6 oz)
Dimensions
155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
Output Connector
Integral 3-pin XLRM-type
Optional Interchangeable Elements
AT4051b-EL (cardioid); AT4053b-EL (hypercardioid)
Accessories Included
AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
Audio-Technica Case Style
S1
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Shop In Store
Come try your favorite dj controller in store, see the latest light effects in action! See our specialist for a good advice.
Buy Online & Pick-up Same Day
If a product shows ''Ready to Ship'' you can always select ''Pickup in store'' at checkout and come the same day at your earliest convenience
