The latest edition of the legendary AT4033 microphone, the side-address AT4033a offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A studio classic and bluegrass favorite, the AT4033 cardioid studio condenser is the microphone that broke the US$1000-barrier in its class. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033a’s 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Includes the AT8449a shock mount for superior isolation.
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Floating-construction capsule assembly provides isolation from noise and vibration
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Custom shock mount provides superior isolationFE
Microphones
Element
Fixed-charge back plate, permanently polarized condenser
Polar Pattern
Cardioid
Frequency Response
30-20,000 Hz
Low Frequency Roll Off
80 Hz, 12 dB/octave
Open Circuit Sensitivity
-32 dB (25.1 mV) re 1V at 1 Pa
Maximum Input Sound Level
145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Noise
17 dB SPL
Dynamic Range
128 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio
77 dB, 1 kHz at 1 Pa
Phantom Power Requirements
48V DC, 3.2 mA typical
Switches
Flat, roll-off; 10 dB pad (nominal)
Weight
13.4 oz (380 g)
Dimensions
6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector
Integral 3-pin XLRM-type
Accessories Included
AT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
Audio-Technica Case Style
R1
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Shop In Store
Come try your favorite dj controller in store, see the latest light effects in action! See our specialist for a good advice.
Buy Online & Pick-up Same Day
If a product shows ''Ready to Ship'' you can always select ''Pickup in store'' at checkout and come the same day at your earliest convenience
