A sensitive, flat response condenser microphone ideal for acoustic instruments.
Includes Mic Clip, 5/8", to 3/8 Thread Adapter, Storage Bag
Shure PG81-LC Condenser Microphone Specifications:
-Microphone Type: Condenser (electret bias)
-Polar Pattern: Cardioid (unidirectional), symmetrical about axis
-Frequency Response: 40Hz-18kHz
-Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
-Output Impedance (at 1kHz): 600 ohms
-Sensitivity (at 1kHz): -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
-Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted field (60 Hz)
-Switch: Built-in On/Off switch
-Recommended Input Load Impedance: 800 ohms minimum
-Output Clipping Level (1 kHz, 1 % THD): : 2000 ohm load, 13 dBV (0.22 V) phantom, -17 dBV (0.14 V) battery
-Maximum SPL: 2000 ohm load: 131 dB (phantom), 127 dB (battery)
-Self-Noise (Equivalent SPL): 20 dB typical, A-weighted
-Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level): 111 dB (phantom), 107 dB (battery)
-Signal-to-Noise Ratio: 68 dB (IEC 651)* at 94 dB SPL.
Power
-Phantom Power:
-Supply Voltage: 11 to 52 Vdc
-Current Drain: 2.0 mA max at 52 Vdc
-Maximum External Voltage Applied to Pins 2 and 3 with respect to Pin 1: 52 Vdc
-Reverse polarity protected to: 100 Vdc
-Battery Power:
-Recommended: 1.5 V alkaline AA size (NEDA 15A)
-Life: up to 10000 hours
Connector: 3-pin professional audio connector (male XLR type)
-Case: Steel and brass construction with black painted finish
-Environmental Conditions: This microphone operates over a temperature range of -20-135°, F (-29-57C) and at a relative humidity of 0 to 95%
-Weight: 0.55 lb. (250 g) without battery
Shure PG81-LC Condenser Microphone Features:
-Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
-Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
-Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
-Powered by AA battery or phantom power supply.
-Internal shock mount for reduced handling noise.
-Durable metal construction.
-On/off switch for onstage control.
