Roulez l'image pour zoomerCliquez sur l'image pour zoom
/
Description
ACTIVE SEMI-HORN-LOADED SUBWOOFER
2700W RMS DIGIPRO® G3 AMPLIFIER
143 dB MAX SPL
USABLE BANDWIDTH [- 6 dB]: 39 Hz to cut frequency
LF: 3 x 18”, 4” v.c. - NEODYMIUM
WEIGHT: 103.9Kg (229.06 lbs)
THE FIRST VIO COMPLEMENT FOR LOW FREQUENCIES
VIO S318 is equipped with three 18” bassreflex half-horn loaded woofers, configured in order to maximize frontal emission. The 3 voice coils are in facts mechanically aligned in order to achieve a perfect phase response. The 3 DIGIPRO G3 amplifiers deliver a total 2700 W RMS power, allowing the system to reach up to 143dB SPL.
The system features an integrated delay module achieving up to 9.9 ms delay with 0,5 ms steps. The crossover module sets the low pass filter alongside with the highpass filter for the integrated crossover output. The system also features an attenuation control, a polarity switch and a RDNet port for remote control.
The high quality multiplex housing is reinforced with a robust polyurea finishing and equipped with 5 aluminium handles per side.
The dolly transport DO-VIOS318 allows to transport up to 3 subs simultaneously, both on wheels or on lift track. As an alternative to the dolly, wheels can be mounted on the rear side of the cabinet.
Technical Data
Speaker Type
Active Bassreflex Semi-Horn-Loaded Subwoofer
Acoustical data
Frequency Response [- 6 dB]
39 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB]
35 Hz (HPF)
Max SPL
143 dB
LF
3x18"
Voice Coil LF
4 "
Directivity
Omnidirectional
Amplifier
Amp Technology
Digipro® G3
Amp Class
Class D
RMS Power
2700 W
Peak Power
5400 W
Cooling
Convection
Power Supply
2700 W SMPS with Auto Range PSU
Processor
Controller
DSP 32 bit
AD/DA Converter
24 bit/96 KHz
Limiter
RMS, Peak, Thermal
Delay Option
0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF
70-105Hz + Full range
LF-Xover out slope
24 dB/Octave
Input
Signal Input
1xXLR balanced
1xRJ45 LINK (RDNet)
Signal Output
1x XLR balanced
1xRJ45 LINK (RDNet)
Power Socket
1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls
1x Input Attenuation Rotary Switch
2x Rotary Encoder (Delay 9.9 ms)
1XPolarity Inversion Switch (0° or 180°)
1xCardioid Mode Switch
1x X-Over Freq Switch (70-105 Hz + Full Range (steps of 5 Hz)
Mechanics
Housing
Multiplex plywood
Polyurea painted
Handles
4x Per Side
Aluminium
Raincover
Included
Rigging Points
2xPick Points on top to fix DRK-210 rigging frame
Width
1300 mm (51.18 in)
Height
520 mm (20.47 in)
Depth
800 mm (31.5 in)
Weight
103.9 kg (229.06 lbs)
Notes:The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice. **AES75: @1 meter, free field, with Music-Noise
Roulez l'image pour zoomerCliquez sur l'image pour zoom
/
Vous pouvez aussi aimer
Récemment vu
Faire des magasins en magasin
Venez essayer votre contrôleur DJ préféré en magasin, voyez les derniers effets lumineux en action! Voir notre spécialiste pour un bon conseil.