HEADRUSH FRFR108MK11

2020-10-30T22:27:43-04:00

Type: AUDIO
Price: 399.00

HeadRush FRFR-108 MKII is a powerful 2000-watt full-range flat-response guitar cabinet with Bluetooth®, 8” speaker, HF compression driver, two combo XLR + 1/4” inputs and XLR output.

FRFR-108® MKII Features

Powerful, Professional Sound - 2000 watts of peak power ensures you have enough headroom for almost any live performance or rehearsal

Precision-Tuned for Amp Modelers - The cabinet design, 8” woofer, and HF compression driver are specially voiced for accurate, linear delivery of amplifier and cabinet emulations

Bluetooth® Enabled - Stream music wirelessly from your mobile device into FRFR-108 MKII’s dedicated Bluetooth® channel

All the Connectivity You Need - Two combo XLR + 1/4" inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix

Quickly Adapts to Venues and Rooms - FRFR-108 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes

Lightweight, Flexible and Sturdy - Weighing just 21lbs / 9.53kg, FRFR-108 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position

Meet the FRFR-108

Perfect Partner for Amp Modelers

If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal or jam session.

Pure and Powerful Tone

FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 delivers a precise, full response across the entire frequency range, without any artificial coloration—which is critical to getting the most out of your amp modeler. The FRFR-108 MKII’s performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.

All the Connections You Need - including Bluetooth®

FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pedal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.

Adapts to Any Stage or Room

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII’s ground lift switch can eliminate hums and buzzes resulting from ground loops.

Road-Ready Lightweight Design

FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

Output Power

2000 W

Drivers

Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil.

High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.

Crossover Frequency

2 kHz

Maximum SPL

130 dB (peak) dB-SPL @ 1 m

Frequency Response

62 Hz – 20 kHz (+/-3 dB)

Frequency Range

52 Hz – 20 kHz (-10 dB)

Horn Coverage

90° horizontal x 60° vertical (nominal)

Connectors

(2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)

(1) XLR output (Link)

(1) IEC power cable input

Input Impedance

Line: 10 KΩ balanced, 20 KΩ unbalanced

Gain/Volume Control Range

-∞ to 0 dB, +4 dBu nominal, +10 dBu for max output

HPF Switch

100 Hz

Bluetooth

Version: 5.0

Profile: A2DP, AVRCP

Codec: SBC

Range: up to 100 feet (30.5m)

Power

Connection: IEC

Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz

Consumption: 1100W

Fuse: T15AL AC250V; 220-240V T6.3AL AC250V

Protection

Electronic clip, thermal, and transducer overdrive protection

Mounting/Installation

Standard 36 mm pole socket

Operating Temperature

14°F to 113°F / -10°C to 45°C

Dimensions

10.1” x 9.6” x 17.2”

256 mm x 245 mm x 436 mm

Weight

21.05 lbs.

9.5 kg