A solid foundation for mixing.
A subwoofer provides the extra-deep low frequencies you need when mixing on relatively small monitors, especially for music that requires serious low-end punch. Powerful and musical, Temblor T8 active, downward-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of tubbines or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system's low end so that you can produce your best mix from top to bottom.
Main components
- 8-inch, downward-firing, glass-composite low-frequency transducer
- Round, front-firing, bass-reflex acoustic port
Controls and filters
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Polarity invert
Power and safety
- 200 watt, Class AB amplification
- Internal damping and heat sink
- Integrated rubber feet for stable placement
Inputs and outputs
- Left and right, balanced ¼” TRS and unbalanced RCA main inputs
- Left and right, balanced ¼” TRS and unbalanced RCA outputs
Technical Specifications
Inputs
|
|
|
2- Balanced ¼” TRS
2- Unbalanced RCA
|
Outputs
|
|
|
2- Balanced ¼” TRS (full range with 80 Hz HPF option
2- Unbalanced RCA (full range with 80 Hz HPF option)
|
Performance
|
|
| Frequency Response |
30 Hz – 200 Hz |
| Low Pass Filter Frequency |
50 – 130 Hz (variable) |
| Signal-to-Noise Ratio |
>98 dB (A weighted) |
| THD |
0.05% |
| Amplifier Power |
200W peak, 100W RMS |
| Power Consumption |
120W |
| Amplifier Type |
Class AB |
| Peak SPL at 1m |
104 dB |
| Woofer |
8” glass-composite, downward-firing |
| Acoustic Port |
Front-firing bass reflex (round) |
User Controls
|
|
| Input Gain Range |
-30 to +6 dB |
| Polarity Switch |
0° or 180° |
| Low Pass Filter Control |
50 Hz to 130 Hz |
| High Pass Filter Switch |
On/Off |
Protection
|
|
|
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
|
Power
|
|
|
100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet
|
|
|
Vinyl-laminated MDF |
Physical
|
|
| Width |
10.2” (260 mm) |
| Depth |
12.6” (320 mm) |
| Height |
11” (280 mm) |
| Weight |
21.2 lbs (9.6 kg) |
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
