8923, rue Lajeunesse, Montréal
Tél : 514-384-7915 / Fax :514-384-7929
Behringer's newly re-designed Dualfex Pro EX2200 achieves new standards in affordable psychoacoustic processing, adding fantastic new dimensions to your sound. The net result is a subjective "loudening" of the audio signal in a manner not achievable by simply applying high and low end boost via an equalizer. Your mixes will sound wider, bigger, brighter, and clearer, with a fuller, firmer, and far better defined bass end when you use the Dualfex Pro from Behringer.
VSP (Variable Sound Processing) Circuit
The upper-frequencies processor has three controls per channel. "Tune" alters the high pass filter cut-off, determining which part of the audio spectrum is to be processed. Thanks to the new VSP circuit, the Dualfex Pro "Process" control enables you to mix between Enhancer and Exciter, until you find a balance that is perfect for your music. As the control is turned clockwise, the ratio classical Enhancement decreases, while that of the other processor, a more aggressive Exciter, increases.
A 50/50 blend occurs at the zero position. The "High Mix" control determines how much high-end processing is applied.
The Dualfex Pro is equipped with a double bass processor for low-frequency enhancement. It combines adjustable low-end Phase Shift with Frequency Correction in a single control. With the "Bass Mode"-control you can choose between a subtle "soft" bass improvement and a more progressive "tight" bass enhancement is added. The bass processor has been designed to perfectly complement the action of VSP high-end processor.
The integrated surround processor enables to improve the intensity of the spatial stereo effect dramatically.
Dualfex Pro - unleash your sound potential.
Professional and multi-application sound enhancement system
Releases the untapped resources of any recording and instrument
VSP (Variable Sound Processing) circuit for simultaneous Enhancer and Exciter Mode
Natural Sonic processor for intelligent sound improvement
Multi-band concept for bass power and high frequency transparency
Super bass enhancer produces "Soft" and "Tight" bass sounds
No decoding needed during reproduction
ALC (Automatic Level Control) system
Integrated Stereo Surround Processor
Improves presence and transparency
Provides sharper stereo imaging
Produces more powerful, fuller bass for your recording
Increases subjective volume level
Reduces listening fatigue
Connectors: RCA and 1/4" jack
Type: RF filtered, servo-balanced input
Impedance: 30 kOhms balanced, 15 kOhm unbalanced
Max. Input Level: +21 dBu balanced and unbalanced (unity gain)
CMRR: typ. 40 dB, >55 dB @ 1 kHz
Connectors: RCA and 1/4 in. jack
Type: unbalanced output stage
Impedance: 30 Ohm
Max. Output Level: +21 dBu, +20 dBm
Bandwidth: 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response: 0.35 Hz to 200 kHz, +0/-3 dB
Noise: >95 dBu, unweighted, 22 Hz to 22 kHz
THD: 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1
0.04 % typ. @ +20 dBu, 1 kHz, Gain 1
IMD: 0.01 % typ. SMPTE
Crosstalk: <-100 dB, 22 Hz to 22 kHz
Type: "Dual Mode" bass processor
Low Mix: variable (0 to 6)
Type: "Natural Sonic" processor with VSP (Variable Sound Processing)
Tune: variable (1 to 8 kHz)
Process: variable (Enhancer to Exciter)
High Mix: variable (0 to 6)
Surround variable (0 to 6)
Function Switches and Controls
Mode switches the bass sound from "Soft" to "Tight"
In/Out activates the relay controlled hard-bypass
Surround activates the surround processor
Function switch LED indicator for each function switch
Mains voltages: USA/Canada ~ 120 V AC, 60 Hz
Power consumption: 5 Watts
Mains connection: standard IEC receptacle
Dimension (H x W x D): approximately 1-1/4 x 19 x 8-1/2 in. (44.5 x 482.6 x 217 mm)
Net Weight: approximately 2.2 kg
Shipping Weight: approximately 3.4 k